关于的土木工程毕业设计外文翻译论文范文.doc

　　关于的土木工程毕业设计外文翻译论文范文 关于的土木工程毕业设计外文翻译论文范文 导读：5678910 你如果认识从前的我，也许会原谅现在的我。 毕业设计（论文） 外文翻译 设计（论文）题目： 宁波新城艺术宾馆 2#楼 结构设计与预算 建筑工程 土木工程 顾 丽 敏 学号： 06404010101 袁 坚 敏 学 专 学 指 院 名 生 导 称： 业： 姓 名： 教 师： 2010 年 01 月 10 日 外文原文 I： A fundamental explanation of the behaviour of reinforced concrete beams in flexure based on the properties of concrete under multiaxial stress M. D. Kotsovos Department of Civil Engineering Imperial College of Science and Technology London (U. K.) The paper questions the validity of the generally accepted vieate branch.Experimental data are presented for reinforced concrete beams in bending ultiaxial pressive state of stress beloate strength rather than postultimate material characteristics. The presence of a plex stress system provides a fundamental explanation for beam behaviour which does not affect existing design procedures. 1 3 4 5 6 7 8 9 10 关于的土木工程毕业设计外文翻译论文范文 导读：salsoformulatedsothatitprovidesadesigntoolnotedforbothitseffectivenessandsimplicity.Thetheorydescribesanalyticallytherelationshipbetetriccharacteristicsofabeambyconsideringtheequilibriumconditionsatcriticalcross-sections.pat . INTRODUCTION The ;plane sections; theory not only is generally considered to describe realistically the deformation response of reinforced and prestressed concrete beams under flexure and axial load but is also formulated so that it provides a design tool noted for both its effectiveness and simplicity [1]. The theory describes analytically the relationship betetric characteristics of a beam by considering the equilibrium conditions at critical cross-sections. patibility of deformation is satisfied by the ;plane cross-sections remain plane; assumption and the longitudinal concrete and steel stresses are evaluated by the material stress-strain characteristics. Transverse stresses and strains are ignored for the purposes of simplicity. The stress-strain characteristics of concrete in pression are considered to be adequay described by the deformational response o