大塑性变形工业纯钛的研究现状.pdfVIP

Metallurgical Engineering 冶金工程, 2015, 2, 98-106 Published Online June 2015 in Hans. /journal/meng /10.12677/meng.2015.22016 Research Achievements of Sever Plastic Deformation on Commercially Pure Titanium 1 1,2* 1 1 Liqiang Lv , Yichao Wang , Hui Li , Jianchao Yang 1 Western Titanium Technology Co., Ltd., Xi’an Shaanxi 2 College of Metallurgy Engineering, Xi’an University of Architecture and Technology, Xi’an Shaanxi * Email: glory.way@ th rd th Received: Jun. 5 , 2015; accepted: Jun. 23 , 2015; published: Jun. 29 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract This paper summarizes the research and development of sever plastic deformation (SPD) tech- nique used in commercially pure titanium (CP-Ti) processing and presents the method and theory of ECAP (equal channel angle press), ARB (accumulation rolling bonding), and ASR (asymmetric rolling) respectively. The influence of the SPD type on pure titanium grain refinement as well as mechanical property, and the variation law of it are investigated. Based on the present application status of SPD, the application prospects and the development of it are discussed. Keywords Commercially Pure Titanium, Sever Plastic Deformation, Ultra-Finer Grain 大塑性变形工业纯钛的研究现状 1 1,2* 1 1 吕利强，王艺超 ，李 辉 ，杨建朝 1西部钛业有限责任公司，陕西 西安 2西安建筑科技大学冶金学院，陕西 西安 * Email: glory.way@ 收稿日期：2015年6月5 日；录用日期：2015年6月23 日；发布日期：2015年6月29 日