车用液压泵实验台恒温油源系统设计与仿真研究.PDFVIP

# 20 # 20061No111 车用液压泵实验台恒温油源系统设计与仿真研究 苑士华, 彭增雄, 荆崇波, 胡纪滨, 郭晓林 ( 北京理工大学机械与车辆工程学院, 北京 100081) : , AMEsim , ; , PID , PID , : ; ; ; AM Esim : TH137 : A : 1001- 3881 (2006) 11- 204- 3 Simulating and Design ofConstantTemperatureOilSupply System Using forHydro- pump YUAN Shihua, PENG Zengxiong, JING Chongbo, HU Jibin, GUO Xiaolin ( School ofMechanical andVehicular Engineering, Beijing Institute ofTechnology, Beijing 100081, China) Abstract: The whole constant temperature oilsupply system was researched1Based on modularization and the working principle, the componentsmodel of the system were setupw ith the help ofAMEsim1 In order tomeet the requirement ofhigh supply flow and high controlprecision, PID controller both in two areaswas used1The simulation results of the system indicate that themode is rightand PID controller both in two areas can fulfill the demands of the application1 It provides the important theoretical basis for the design of the 库 constant temperature oil supply system 1 K eywords: Constant temperature contro;l O il supply system; Simulation; AMEsim 例 0 , 案 E , A C : 模 : 300L /min, 40~ 130e , ? 1e 凯 1 PID , ; O PID , , , , E M , A , C PID