流体动力泵.docVIP

Fluid Power Pumps Purpose of pumps Every fluid－power system uses one or more pumps to pressurize the hydraulic fluid. The fluid under pressure, in turn, performs work in the output section of the fluid-power system. Thus, the pressurized fluid may be used to move a piston in a cylinder or to turn the shaft of a hydraulic motor. The purpose of a pump in a fluid-power system is to pressurize the fluid so that work may be performed. Some fluid-power systems use low ressures-100psi or less-to do work. Where a large work output is required, high pressures-1000pse or more-may be used. So we find tha