Patran Nastran 错误代码查询表.doc

Patran Nastran 错误代码查询表 This section includes a description of all known errors and general limitations in all versions of MSC.Nastran. The field next to the error number indicates the version that the error is corrected. GL in this field stands for a General Limitation which indicates a fix is not planned. Continuous updates to the error list are available to MSC.Nastran clients on the MSC web page at . The site may be located by clicking on Services and Support. Major Capabilities A list of major capabilities is provided to assist the analyst is choosing key-words to search for to locate error that may impact their current project. Error Description Each error has a heading with as many as three entries. The first entry identifies the major capability affected and is also listed in the major capabilities index. The second entry identifies either the name of the module in which an abnormal exit occurs or the card type affected if computed results are not satisfactory. (For abnormal exits, the last module name that appears in the Performance Summary Table is usually the module where the exit occurs.) The third entry gives the symptoms of the error, such as, the MSC/NASTRAN system or user message number printed just prior to termination or a description of a machine-dependent error. Other symptoms might be missing output or wrong answers. Error reports are updated when more facts or better avoidance techniques become known. NOTE: Beginning with Version 68, MSC/NASTRAN has adopted a Version numbering system of the form XX.YY.ZZ, where XX is the major release, YY indicates a minor release with few enhancements and ZZ indicates error corrections. Note that modifications to the code that are required so that a specific machine runs the same as previous releases on other machines are considered error corrections in this numbering scheme. Thus, there may not be any references in the error list to a specific release number.