电源的安规要求点.pptVIP

Touch Current 接触电流测试 The equipment was connected to 1.06 time Voltage,?50(or 60Hz). The equipment was placed on an insulating surface and all connections to external equipment were disconnected to prevent stray leakage paths. The unit protective earthing connection was disconnected during the test. 设备连接到的电源电压是设备额定电压范围的上限1.06倍，频率使用50或60赫兹。 设备放在绝缘的表面上并断开与外部其它设备的连接。带有保护接地连接的要在测试时断开。 Measuring instrument used: Simpson Meter 228 Touch Current 接触电流测试 Touch Current 接触电流测试 Equipment with touch current exceeding 3,5 mA For STATIONARY PERMANENTLY CONNECTED EQUIPMENT or STATIONARY PLUGGABLE EQUI