《基于SPI的串行FLASH存储器读写系统设计》本科毕业设计.docVIP

本科毕业设计（论文） 基于SPI的串行FLASH存储器 读写系统设计 THE READWRITE SYSTEM DESIGN OF SERIAL FLASH MEMORY BASED ON SPI 毕业设计任务书 发题日期： 题 目 基于SPI的串行FLASH存储器读写系统设计 1、本论文的目的、意义 Flash存储器是在20世纪80年代末逐渐发展起来的一种新型半导体不易挥发性存储器，它具有结构简单、高密度、低成本、高可靠性和在系统的电可擦除性等优点。本设计要求在基于SPI接口下对FLASH存储器进行读写系统的开发，使存储芯片具有可读，写，擦除等功能。通过这次毕业设计，既能做出有用的软件产品，又对单片机、Flash存储器、SPI、以及C程序设计加深认识，争取融会贯通，用于以后的工作中。 2、学生应完成的任务 （1）了解Flash存储器； （2）了解SPI接口原理； （3）完成Flash存储器读写系统软件的设计； （4）要求所编制的软件在答辩时演示； （5）Flash存储器 ；SPI ；Intel格式 Abstract Through researching the MCU program file Intel style and binary style, I was not only studying MCU SPI work methods, but also analyzed readwrite sequence of serial FLASH memory chip based on SPI. Then designed a high accurate rate FLASH memory chip readwrite system. FLASH memory chip readwrite system can transmit data between PC and MCU .Meanwhile, all the transmitted data have memory address, the number of data byte and check byte. What’s more, the process had high reliability. In the design, the bank of system was to program software which could read and write to the LED displayer on-line .The software downloaded the LED displayer font which can be read and checked. The accurate rate also can up to 100% after programming. Except above described, the software can modify program memory to update and amend controlling board parameter. Further more, the system used serial port to communicate .On the one hand ,PC could control with super terminal software ;On the another hand, MCU has the serial port which can receive data conveniently. The design, fir