基于公理设计挤压铸造设备设计.pdfVIP

学兔兔 Dee．2010 VOI．59 NO．12 基于公理设计的挤压铸造设备设计 邓建新 ，邵 明 (1．华南理工大学机械与汽车工程学院，广东广州510640； 2．广西大学广西制造系统与先进制造技术重点实验室，广西南宁530004) 摘要：将公理设计理论引入到铸造设备的设计开发中，系统地分析了挤压铸造设备的公理设计过程。建立了挤压铸造设 备公理设计的框架和原则，阐述功能域和物理域的映射分解过程，得到了设计矩阵方程，在此基础上提出了一种挤压铸 造设备主要部件的设计顺序。设计结果应用到2 500kN的挤压铸造设备开发过程中，改善了设计，提高了设计效率。 关键词：公理设计；挤压铸造设备；设计顺序；功能设计 中图分类号：TH122，TG249．2 文献标识码：A 文章编号：1001—4977(2010)12—1320—05 Axiomatic Design of Squeeze Casting Equipment DENG Jian—xin’一．SHAO Ming’ (1。School of Mechanical and Automotive Engineering。South China University of Technology Guangzhou 51 0640，Guangdong，China；2．Key Laboratory of Manufacturing System Advance Manufacturing Technology of Guangxi Province，Guangxi University， Nanning 530004，Guangxi，China) Abstract： ln this paper，the theery of axiomatic design was introduced into the design and development of squeeze casting equipment(SCE)．The framework and principles for axiomatic design of SCE was constructed，and the matrix design equations of SCE design were achieved with decomposing the function domain and physical domain．Then，a design sequence of main components of SCE WaS presented．AIl results have been applied to the development of the SCE with Iocking force of 2 500 kN，which not only optimized the design，but also improved designing efficiency． Key words：axiomatic design；squeeze casting equipment；design sequence；functional design 挤压铸造工艺是对低速浇人型腔内的液态金属施加 design，AD)是目前产品设计理论的研究热点，为产 较高的机械压力，并保压成形和结晶凝固的一种集铸造