基于流体仿真的双螺杆压缩机的转子结构优化设计.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2014, 3, 152-159 Published Online December 2014 in Hans. /journal/met /10.12677/met.2014.34020 The Design of Structure Optimization on Twin-Screw Compressor Rotors Based on the Fluid Simulation Zhengang Jiang School of Mechanical Engineering, Jiangnan University, Wuxi Email: 632262341@ th th th Received: Sep. 19 , 2014; revised: Oct. 16 , 2014; accepted: Oct. 24 , 2014 Copyright © 2014 by author and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract The level of designing the twin-screw compress or rotor profile in our country is relatively back- ward compared to foreign countries. The rotor is an important part of the screw compressor. This paper presents the new ideas based on arc-envelope to design the screw rotor. Taking the unila- teral asymmetric cycloid-pins arc tooth profile as the research object, it designed a new type of rotor profile and built screw rotors with arc envelope tooth profile. It founded flow field simula- tion model of the original, and new twin-screw compressor rotor profile adopted the 3D software, simulated the distribution of its pressure and flow rate at operating speed with the software of Fluent. It predicted the rational of simulation results on the new designed rotor profile and pro- vided a reference for the improvement of the new male and female twin-screw compressor rotors until getting the excellent performance rotors. Keywords Arc Envelope, Three-Dimensional Modeling, Fluid Simulation Analysis, Rotor Profile 基于流体仿真的双螺杆压缩机的 转子结构优化设计 姜振钢 江南大学机械工程学院，无锡