毕业设计说明书电厂330MW机组八级热力系统及管道通流部分的设计.doc

摘要 本设计为某发电厂的热力系统计算与通流部分管道的设计，要以最大连续蒸发量为1036t/h的锅炉及一个机组容量为330MW的汽轮机组的初始数据通过原则性热力系统的确定及计算、通流部分管道的设计及计算。可行方案的选取上从实际工程项目出发，综合考虑安全可靠、经济实用，节省能源，保护环境的建设方针，同时对运行是否稳定可靠，技术是否成熟等方面进行考虑，综合比较确定。 本设计主要是对全厂的热力计算及对部分管道通流的计算及管道的选择，同时要校核相关汽水流量、进气量、发电量。根据原则性计算结果对相关热力管道进行相关基本尺寸计算，根据基本尺寸参照相关标准热力管道选型手册选择相关标准管道，并对所选管道进行相关校核计算，纠正所选管道型号，优化电厂热力系统。 最终得出电厂初步设计的相关系统确定，得出经济性较高，有建设价值的电厂建设方案。 关键词：热力系统；热经济性；部分通流管道 Summary The design for the design of a power plant thermal system to calculate the flow part of the pipeline, to the maximum continuous evaporation is 1036t / h boiler and a unit capacity of 330MW Steam Turbine initial data through the principle thermal system Identify and calculations, pipeline design and calculation of the flow passage. From the actual project on the selection of feasible options considered safe, reliable, economical and practical, energy-saving construction guidelines to protect the environment, while running stable and reliable, whether the technology is mature to be considered, comprehensive comparison to determine.This design choice of the whole plant of thermodynamic calculation and the calculation of the flow passage on the part of the pipeline and pipe at the same time want to check water Flow into the gas generating capacity. Related heat pipe principle calculation results related to the basic dimensions of the basic dimensions refer to the relevant standard heat pipe Selection Guide to select the relevant standard pipe, and the selected pipeline-related checking calculation to correct the selected pipeline model, optimization of power plant thermal system.Ultimately come to power plant preliminary design of the system to determine the obtained higher economic value of construction power plant construction program.Keywords: thermal systems; heat economy; part of the pipeline flow passage 目录 摘要 I Summary II 前言 1 第一章 设计概述 2 1.1设计依据 2 1.2设计可行性 2 1.3设计内容 2 第二章 原则性热力系统计算 3 2.1热力系统相关已知参数 3 2.1.1汽轮机形式及参数 3 2.1.2锅炉型式及参数 4 2.1.3回热加热系统参数 4 2.1.4其他数据 4 2.1.5简化条件 5