防腐方案2.12管道,设备.docx

Method Statement ofpiping and non-Standard equipmentsand blasting and coatingMD-511-21MB-CN-GE-MST-3001Rev.No. Rev. Date Description of Revision Prepared By Checked By Approved By Approved By (Employer)A01 06 Dce 2015For ApprovalZou Xing HuaLiang Chang JinZhao Jing LongCONTENTS1.SCOPE32.REFERENCES33.DEFINITION64.UNITS CONVERSIONS:75.RESPONSIBILITIES:76.WORK FLOW FOR PAINTING CONSTRUCTION107.PAINTING PROCEDURE118.INSPECTION AND TEST219.INSTRUMENTS USED2310.SITE SAFETY INSTRUCTIONS2411.JOB SAFETY ANALYSIS29Attached table291.SCOPE The purpose of this method statement is defined and guide to abrasive blasting and painting andcoating works forUMM WU’AL PHOSPHATE PROJECT Beneficiation Plant, Crusher Overland ConveyorProject, This methodstatement is applicable to the protective painting and coating for piping and equipment for shop andsite application .2.REFERENCES2.1 Maaden standards: MD-101-SMEM-EG-ME-SPC-007 Protective Coating MD-101-SMEM-EG-PI-SPC-0003 Piping Fluids identification MD-101-SMEM-EG-ST-SPC-0008 Protective coating for concrete MD 101-SMEM-EG-ST-SPC-0009 Protective Coating of Structural steel work MD-101-SMPM-PM-QA-PEI-OO01 Contractor Quality Requirements2.2 SSPC: The Society For Protective Coatings, Specifications: SPC-PA l Shop, Field and Maintenance Painting SSPC-PA 2 Measurement of Dry Paint Thickness with Magnetic Gauges SSPC-Vis Pictorial Surface Preparation Standards for Painting Steel SurfaceSSPC-SP l Solvent Cleaning SSPC-SP 2 Hand Tool Cleaning SSPC-SP 3 Power Tool Cleaning SSPC-SP 5 White Metal Blast Cleaning SSPC-SP 6 Commercial Blast Cleaning SSPC-SP 7 Brush-Off Blast Cleaning SSPC-SP 8 Pickling SSPC-SP 10 Near-White Blast Cleaning SSPC-SP 11 Power Tool Cleaning to Bare Metal 2.3 Swedish Standards Institution, Stockholm 3, Sweden SIS 05 59 00 Pictorial Surface Preparation Standards for Painting SteelSurfaces 2.4 ANSI/ASME: American National Safety Institute/American Society of MechanicalEngineers ANSI 253