Rhino命令列表.doc

Rhino命令列表 3Dface 绘制三维空间多边形网格面。 (Tools Polygon Primitives 3-D Face (Mesh and STL Tools 3View 三视图界面 (ViewViewport Layout 3 Viewports (Viewport Layout 4View 四视图界面 (Viewport Layout (View Viewport Layout 4 Viewports AddNextU 于U方向往下加选一个控制点。 (EditSelect Control PointsAdd next U (Select Points AddNextV 于V方向往下加选一个控制点。 (Edit Select Control Points Add nextV (Select Points AddPrevU 于U方向往前加选一个控制点。 (Edit Select Control Points Add prev U (Select Points AddPrevV 于V方向往前加选一个控制点。 (Edit Select Control Points Add prevV (Select Points AlignBackground-Bitmap 排列对齐背景图的位置。 (View Background Bitmap Align (Background Bitmap AllLayereOn 打开所有层。 (Edit Layers All Layers On (AllLayersOn Along 沿着一条垂直于一曲线的直线。 (Object Snap Angle 测量两线段的角度。 (Analyze Angle (Analyze ( ( ( ( ApplyCrv 沿着曲线排列复制物件。 (Curve From Objects Apply UV Curves (Curve From Object ApplyMesh 将一曲面转化成多边形网格。 (Tools Polygon Mesh Apply to Surface (Mesh Arc 圆心、半径、夹角绘制圆弧。 (CurveArcCenter, Start, Angle (Arc and Main Arc3Pt 三点绘制圆弧。 (CurveArc3 Points (Arc ArcDir 两点与切线方向绘制圆弧。 (CurveArcStart, End, Direction (Arc ( ( ArcTTR 依照两曲线之切线绘制圆弧。 (CurveArcTangent, Tangent, Radius (Arc Area 计算曲面的区域。 (Analyze Mass Properties Area (Mass Properties AreaCentroid 计算曲面的中心。 (AnalyzeMass Properties Area Centroid (Mass Properties AreaMoments 计算曲面的力矩。 ( AnalyzeMass PropertiesArea Moments (Mass Properties Array 排列复制五件。 (Transform Array Rectangular (Main, Transform, and Array ArrayCrv 沿着曲线排列物件。 (Transform Array Along Curve (Array ArrayPolar 沿着圆形排列复制物件。 (Transform Array Polar (Array ArraySrf 沿着曲面排列复制物件。 (Transform Array Along Surface (ArraySrf Arrow 绘制一完整标注箭头。 (Annotate Arrowhead 绘制一标注箭头。 (Annotate Back 后视图。 (View Set View Back (Set View Baseball 绘制棒球结构的球体。 (Sphere BaseballEliipsoid 绘制棒球结构的椭球体。 (Sphere Bend 弯曲物体 (Transform Bend (Transform Bisector 绘制一条介于两线中间的线段。 (CurveLineBisector (Lines Blend 将两条曲线顺滑地连接。 (CurveBlend (Curve Tools BlenzdSrf 将两曲面顺滑地连接。 (Surface Blend