罗斯蒙特8732EM流量计系统.PDFVIP

2014 年 6 月 罗斯蒙特 8732EM 流量计系统 North American Certifications Factory Mutual (FM) 8732EM Transmitter 8705-M and 8711-M/L Flowtube Note: Note: For Intrinsically Safe (IS) 4-20mA and Pulse Outputs on the 8732EM, When used in hazardous (classified) locations, the 8705-M and output code “B” must be selected. 8711-M/L may only be used with a certified 8732EM transmitter. N5 Non-Incendive for Class I, Division 2, Groups ABCD: T4 N5 Non-Incendive with Intrinsically Safe Electrodes Dust-Ignition Proof for Class II/III, Division 1, Groups EFG: T5 for Class I, Division 2, Groups ABCD: T3…T5 -4 Dust-Ignition Proof for Class II/III, Division 1, Groups EFG: T2…T5 Enclosure Type 4X, IP66 -29 Install per drawing 08732-2062 Enclosure Type 4X, IP66/68 (IP68 remote mount only) Install per drawing 08732-2062 Special Conditions for Safe Use (X): 1. Units marked with “Warning: Electrostatic Charging Hazard” Special Conditions for Safe Use (X): may either use non-conductive paint thicker than 0.2 mm or 1. Units marked with “Warning: Electrostatic Charging Hazard” non-metallic labeling. Precautions shall be taken to avoid may either use non-conductive paint thicker than 0.2 mm or ignition due to electrostatic charge o