井架逃生装置Assets emgy dscnt dvice.docVIP

User Instruction Manual Rollgliss? Rescue Emergency Descent Device with Manual Retract, High-Speed This manual is intended to be used as part of an employee training program as required by OSHA. Figure 1 - Emergency Descent Device with Manual Retract WARNING: This product is part of an emergency descent system. The user must follow manufacturer’s instructions for each part of the system. These instructions must be provided to the user of this equipment. The user must read and understand these instructions before using this equipment. Manufacturer’s instructions must be followed for proper use and maintenance of this equipment. Alterations or misuse of this equipment, or failure to follow instructions, may result in serious injury or death. IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA. IMPORTANT: Record the product identification information from the ID label in the inspection and maintenance log in section 9.0 of this manual. ? Copyright 2000, DB Industries, Inc. 1 DESCRIPTION The Emergency Descent Device is only available as a sloped descent model. The Emergency Descent Device is designed to be attached to a guide cable, and includes a Guide Cable Trolley and Suspension Bars. See Figure 1. APPLICATION PURPOSE: The Emergency Descent Device is intended to be used as a component of an emergency escape system to provide a means of controlled descent from an elevated structure. The guide cable sleeve and suspension bar kit is used to attach the Emergency Descent Device to a guide cable, and should be used for applications where it is necessary to direct the user to a specific landing area, or when the user must be held stable during the descent (i.e. windy conditions). WARNING: The Emergency Descent Device must not be used for fall protection. LIMITATIONS: The following application limitations must be considered before using this equipment: CAPACITY: This equipment is designed for use by p