- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
氢氧化铝制备高纯氧化铝
摘 要
本实验是研究高纯氧化铝粉体的制备方法,属于氧化铝粉体制备领域。之所以研究这个课题,是因为近年来,国内高纯、超细α- Al2O3 的应用领域迅速拓宽,引进和消化吸收的氧化铝高技术材料生产线增加,使得高纯、超细α- Al2O3 的研究、开发成为一个非常活跃的领域【1】。又由于生产1t多品种Al2O3 可获利润为等量级的冶金级Al2O3 的10倍,甚至100倍,可创造相当可观的经济效益。因此,迅速开发一种低成本、具有竞争力的高纯、超细α- Al2O3 的新方法显得尤为重要。故而,设计高纯氧化铝的制备方案,具有很高的经济价值和社会意义。
称取一定量的氢氧化铝快脱粉粉体,加水配制成悬浊液,为了使氢氧化铝理解完全,在85℃下边加热边搅拌一个小时【2】。滴加配制的稀HNO3(1:3),调PH为5.0~6.0除去其中的杂质硅,再用组织搅拌匀浆机搅拌清洗10分钟,用G4漏斗抽滤,重复清洗步骤5遍,除去杂质钠离子、钾离子以及引入的硝酸根离子。在110℃的烘箱中烘一个小时后,再分别在600℃和1200℃的马非炉中各煅烧一个小时,制得高纯氧化铝粉末【3,4】。
用所设计的方案,制备得到得的高纯氧化铝,经过检测其中各杂质的含量:硅含量21ppm,铁含量为17ppm.
根据高纯氧化铝制备标准,符合制备要求。所制备的高纯氧化铝纯度达到99.997%,可用作荧光粉用高纯氧化铝
关键词:氢氧化铝;高纯氧化铝;制备
ABSTRACT
This experiment is to study the high-purity alumina powders, are areas of alumina powder. The reason of this issue, because in recent years, the domestic high-purity, ultra-fine α- Al2O3 rapidly expanding areas of application, introduction and absorption of increased alumina production line of high-tech materials to make high purity, ultra-fine α- Al2O3 of to develop into a very active area. Also, because many species produce 1t Al2O3profitability of metallurgical grade Al2O3 such magnitude is 10 times, or even 100 times, can create considerable economic benefits. Therefore, the rapid development of a low-cost, competitive high-purity, ultrafine α- Al2O3 in the new method is particularly important. So, design preparation of high purity alumina program, with high economic value and social significance.
Weigh a certain amount of aluminum hydroxide fast off body, prepared with water into a suspension, in order to understand fully aluminum hydroxide, heated at 85 ℃ below stirring for an hour. Dropping the preparation of dilute HNO3 (1:3), adjust PH to 5.0 ~ 6.0 to remove impurities including silicon, and then mixing Homogenize the tissue for 10 minutes stirring cleaning, filtration funnel with a G4, repeat cleaning steps 5 times to remove impurities Sodium, potassium, as well as the introduction of nitrate ion. At 110 ℃ drying oven for an hour, then at 600 ℃ and 1200
原创力文档


文档评论(0)