感应门锁操作步骤.doc

Electron Door Lock Manual List of Lock sound and light tips hint Explanation 1 Ring twice The lock time is different from computer time. 2 Ring three times Swipe the wrong door or room number is set incorrect. 3 Ring four times The door is locked on the inside. 4 Ring five times The card has been reported of loss. 5 Ring six times The time of the card expires. 6 Ring seven times Information is empty and only the general card can open. 7 Card initialization failure Card is not put on the card machine or card is damaged or card machine is not connected properly. 8 Six long rings Under voltage 9 No reaction No power or under voltage 10 Diver sounds normal and green light is on, but cannot open Clutch is in the wrong direction or the square rod is not inserted in the clutch. 11 No electricity after only a short usage time Short-circuit or low battery power or there are foreign bodies on the circuit board. ring once Green light on suggests success, while red light on failure. Part One: lock software usage Ⅰ.System installation Software Installation Lock my companys software CD-ROM into your computer CD-ROM drive (without access the card-issuing machine to the computer), and then double-click the CD-ROM drive with the mouse to open the CD-ROM, and then double-click the file RF.exe to install it. This lock software is installed by default in the D drive.2. hardware, and USB driver installation After the completion of software installation, insert the data line interface of the card machine into the computer USB port, and make sure that the access is good, with no loosening. This time, your desktop will be prompted to find a new hardware. You are prompted to Welcome to the found new Hardware Wizard. click Next ,Select Install from a list or specific location (Advanced) and then click Next. First in the Browse, select C Division disk (USB drive CP210x \ Win2k-XP is automatically installed on the C drive directory), and then select Do not search, I wi