奥氏体变形对耐候钢相变行为及显微组织的影响-Journalof.PDF

第28卷第6期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol128,No.6 2007 年 6 月 Journal of Northeastern niversity( Natural Science) Jun. 2 0 0 7 1 1 1 2 吴红艳 , 杜林秀 , 刘相华 , 董俊华 ( 1. , 110004; 2. , 110016) : MMS-100 , ,CCT # , , # ,, , # # : ;CCT ; ; ; : TG 115.213 : A : 1005-3026(2007)06-0809-04 Effect of Austenite Deformation on Phase Transformation and Microstructure of a Weathering Steel 1 1 1 2 W U H ong-yan , D U L in-xiu , LI UX iang-hua , DON G Jun-hua ( 1. The State Key Laboratory of Rolling and Automation, Northeastern niversity, Shenyang 110004, China; 2. Institute of Metal Research, T he Chinese Academy of Sciences, Shenyang 110016, China. Correspondent: W Hong-yan, E-mail: amiw @ 163. com) Abstract: Continuous cooling transformation (CCT) curves were plotted for the austenite before and after the compression deformation at 850 e , as a result of an investigation on a weathering steel which was tested on MMS-100 tester by means of dilatometry in combination with Vickers hardmeter. Optical microscope and SEM were employed to investigate the influences of cooling rate and deformation process on the transformation behavior and microstructure. Experimental results showed that in the whole deformation process the starting phase-transformation temperature increases with the polygonal ferrite area moving towards top left corner on the curve diagrams, thus increasing the critical cooling rate of ferrite plus pearlite. The def