汽车车轮轮辋模具设计及计算机模拟.docVIP

摘要 模具行业的技术水平标志着一个国家制造业的整体实力，所以模具行业一直是各国政府重视的行业之一。随着计算机的发展，模具的设计和加工技术有了很大的进步。各种三维软件为模具的设计提供了，更为便利和广阔的平台。 滚压模具作为其中之一，其加工回转体空心件的方法和工艺非常特别。滚压模具的凸模和凹模是通过电动机带动的滚轮，电动机带动这种凸模和凹模旋转，轮辋的形状就是通过滚型上下模对金属坯料施加压力迫使金属在上下模间产生塑性变形而成形的。 本论文的工作是首先介绍了我国模具的发展现状以及与滚压模具的设计与发展有关的的情况。然后在熟练掌握冲压成型模具的设计原理的基础上，重点以汽车车轮轮辋为设计对象，对轮辋进行工艺分析，并基于PRO/E进行三维造型，模具的设计，以及三维模架的设计。此外，还利用有限元分析软件ANSYS对其中的工艺过程进行了静力分析。 关键词: 轮辋；模具设计；ANSYS模拟分析 ABSTRACT Mold marks the skill level of the industry of a countrys overall strength of the manufacturing sector, so the industry has always been a die States that a government attaches great importance to one of the industry. With the computers development, mold design and processing technology have made great progress. A variety of three-dimensional software for mold design, give more convenient and broad platform. Roll one die as one of the hollow rotary processing methods and technology of a very special one. Rolling punch die and die by the wheel drive motor, motor drive that punch and die rotation, the shape of the rim through the upper and lower roller-type mode of metal billets to exert pressure on the metal mold in the upper and lower plastic deformation leads to and shape. In this paper, the work is first introduced the development of Chinas mold and die design and flow-development situation. And then stamping master mold design principle based on the focus of a car wheel rim for the design of objects, on the rim for process analysis, and based on PRO / E three-dimensional modeling, mold design, as well as the design of three-dimensional mold. In addition, the use of finite element analysis software ANSYS process for which a static analysis. Keywords: Rim; Mold design; ANSYS simulation analysis 目录 摘要 Ⅰ ABSTRACT Ⅱ 1绪论 1 1.1 模具的发展现状 1 1.2 模具的分类 1 1.3 设计内容及任务 4 2 三维造型方法及软件介绍 5 2.1 曲面造型法概述 5 2.2 曲面造型软件Pro/Engineer概述 9 3 轮辋工艺分析及模具结构设计 13 3.1 三维建模过程 13 3.2 总体分析 总体设计思路 16 3.3 模具具体结构设计 20 4 成型设备的选择 26 4.1 设计冲压力与压力中心 初选压力机 26 4.2 压力机的最终确定 27 5 基于ANSYS的有限元静力分析 29 5.1有限元法和有限元模拟软件A