《岩石力学与工程学报》排版格式与论文书写要求-同济大学学报.docVIP

不同刺入深度下桩端受力的模型试验及数值模拟 周 健1, 2，高 冰 2，郭建军2，贾敏才1, 2 (1.同济大学岩土及地下工程教育部重点实验室，上海　200092 2.同济大学地下建筑与工程系，上海　200092；3.) 摘要：通过自行设计的可视化模型试验，采用高清相机、显微数码及图像分析等技术，对纯砂中桩端埋入持力层不同深度的桩端刺入试验进行宏细观研究。对随桩端刺入深度不同而产生相应的桩段刺入的受力，砂土的位移场和应变场，细观机理进行了分析研究。通过开发三维非圆颗粒重点对纯砂中桩端刺入的室内试验进行PFC3D数值模拟，将土体细观参数变化与宏观力学响应联系起来，揭示桩刺入过程中桩端砂土的宏细观演化机理。揭示出端阻力的发挥在细观上主要表现为桩端附近颗粒接触力的变化：桩端下部颗粒的压密范围、桩脚附近土体孔隙率和接触数变化趋势是端阻是否随埋深而变化的主要因素；达到极限端阻后，承载力略微增加在细观上主要表现为持力层中桩侧颗粒孔隙率减小、接触力增大。 关键词：桩端刺入，临界深度，颗粒流模拟，宏细观机理 Model test and numerical simulation of the pile tip resistance under different penetration depth ZHOU Jian1,2, GAO Bing1,2,GUO Jianjun2,JIA Mincai1, 2 Key Laboratory of Geotechnical and Underground Engineering of Ministy of Education, Tongji University, Shanghai 200092, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China.) Abstract：Macro and micro researches on pile tip penetration burried in different depth of bearing layer in pure sand is carried out under self-designed visual model test by the means of high-resolution digital imaging devices, the digital microscope visualization and image analysis procedures. The 3D non-circle particle PFC3D numerical simulation method is developed to mainly research the process of pile tip penetration in laboratary model tests in pure sand.The macro and micro variation of soil parameters is connected with the macro mechanical response in order to reveal the mechanism of soil variation aroud pile tip in the course of penetration. It mainly represents that pile tip resistance is closely related to the particle contact force around pile tip in micro side: the compacted area of particles at the bottom of the pile tip,the changing tendency of porosity and coordination number nearby the pile foot mainly decide the possibility of pile tip resistance’s change in correspond to the buried depths;when the ultimate pile tip resistance is reached, the slightly increase of capacity is caused by reinforcing effect induced by pile tip resistance to frictional