红外高发射陶瓷涂层发射率与厚度关系.pdf

24 　 2 　　4 　2007 Acta M ateriae Compositae Sinica Vol.24 No.2 April 2007 :1000-3851(2007)02-0086-06 1 *1 2 周基炜, 王小群 , 韩杰才 (1. , 100083;2. , 150006) 　:　, , , , 。, 。 , , 。, 。, Maxw el-l Garnett , 。, 。 :　;;;; :　TB332　　:A Relationship between emissivity and thickness of infrared composite ceramic coatings with high emissivity 1 *1 2 ZHOU Jiwei , WANG Xiao un , HAN Jiecai (1. School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China; 2. Center for Composite Materials and Structure, H arbin Institute of Technology, Harbin 150006, China) Abstract:　Under precondition of high emissivity, the thickness of high emissivity ceramic coatings should be reduced to satisfy the re uirement for mechanical property, w hich can also save raw materials and decrease the weight of the apparatus. So the relationship between emissivity and thickness of the coatings is important. In this paper, the coatings w ere prepared f rom Al O sols and high emissivity fillers by spin and spray processes, respec- 2 3 tively . The relationship between emissivity and thickness of coatings w as examined, and the critical thickness of coatings w as determined w hile the emissivity changes with the thickness rapidly. Based on Maxw el-l Garnett theory, a new theoretical model about the relationship betw een emissivity and thickness of composite coatings is established. The emissivity values f rom the theoretical calculation are agree w ith the experimental data, w hich show s that the