扩压叶栅最佳弯叶片生成线与展弦比的关系-OALib.PDFVIP

第 34 卷 增刊 中 国 电 机 工 程 学 报 Vol.34 Supplement Nov.20, 2014 2014 年 11 月 20 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. 153 DOI ：10.13334/j.0258-8013.pcsee.2014.S.022 文章编号：0258-8013 (2014) S-0153-07 中图分类号：TK 47 扩压叶栅最佳弯叶片生成线与展弦比的关系 凌敬，杜鑫，王松涛，王仲奇 (哈尔滨工业大学能源科学与工程学院，黑龙江省 哈尔滨市 150001) Relationship of Optimum Curved Blade Stack Line and Aspect Ratio in Linear Compressor Cascade LING Jing, DU Xin, WANG Songtao, WANG Zhongqi (School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, Heilongjiang Province, China) ABSTRACT: In order to research the relationship of optimum 机压比不断增大，多级轴流压气机中端区损失不断 curved blade stack line and cascade aspect ratio in linear 增大，减小端区损失已经成为多级轴流压气机气动 compressor cascade, 49 schemes at 7 different aspect ratio were 设计的一个重要方向[1] 。根据流道内流体的完全径 simulated. Numerical results show that cascade loss decreases with the increase of curved height at the same curved angle, 向平衡方程，叶片弯曲能够通过改变叶片对流体的 and the optimum curved height is 50%. Loss variation with 作用力控制流径向压力梯度[2]，使吸力面角区内低 curved angle presents an approximate parabola type at the same 能流体向叶展中部迁移，推迟角区分离的产生，减 curved height. There is an optimum curved angle with the 小了端区损失。正弯叶片能够有效减小端区负荷， increase of curved angle, at which the total loss is minimal. The optimum angle is positively correlated with the local blade 使叶栅负荷沿展向分布均匀化，在压气机叶片设计 loading variation along span wise, and both of them decrease 中作为降低端区损失的主要措施有很广泛的应用。 with the increase of aspect ratio in the overall trend. Profile [3-4] Breugelmans 通过实验证明了叶片倾斜、叶 loss at mid span incr