基于Matlab的无刷直流电机控制系统仿真研究.PDFVIP

本文引用格式：谢少华，瞿遂春．基于 Matlab 的无刷直流电机控制系统仿真研究 [J]．新型工业化，2015，5(3)：28-34 DOI： 10.3969/j.issn.2095-6649.2015.03.04 基于 Matlab 的无刷直流电机控制系统仿真 研究 谢少华，瞿遂春 ( 湖南工业大学电气与信息工程学院，湖南 株洲 412007) 摘　要：本文在分析无刷直流电机运行原理的基础上 , 提出了一种基于 Matlab 建模的新方法，即通过 Matlab 中原有的同步电机模型，改变其反相电动势参数，然后在外部搭建位置检测与换相电路，可以方便 快捷的构成无刷直流电机控制系统仿真模型。并对控制系统仿真模型各个部分的建模进行介绍，同时 , 将 仿真结果与实验结果进行对比。对比结果表明，仿真结果与实验结果基本一致，在 Matlab 中建模的新方 法能够正确反映无刷直流电机控制系统性能，对实际控制系统设计与调试提供重要依据。 关键词：无刷直流电机； 建模；系统仿真 Simulation Study on Control System of Brushless DC Motor based on Matlab XIE Shaohua, QU Suichun (College of Electrical and Information Engineering, Hunan University of Technology , Zhuzhou 412007, China) Abstract: This paper analyzes the operation principle of Brushless DC motor, this paper proposes a new method based on Matlab modeling, namely through the synchronous motor model of the original Matlab, change the inverse electromotive forceparameters, then the external set position detection and commutation circuit, which can be convenient for brushless DC motor control system the simulation model. This paper introduce the sub-modules of the controlling system in detail., at the same time, the simulation results are compared with the experimental results. Results show that, the simulation results are consistent with the experimental results, a new method of modeling in Matlab can correctly reflect the performance of Brushless DC motor control system and provides an important basis for the desi