MI的天线升降控制接口电路设计.doc

毕 业 论 文（设 计） 中文题目：EMI的天线升降控制接口电路设计 英文题目：EMI antenna down control interface circuit design 姓 名 学 号 专业班级 电气工程及其自动化 指导教师 指导老师职称 副 教 授 提交日期 2010年5月10日 EMI的天线升降控制接口电路设计 摘要 本EMI的天线升降控制接口电路设计是电磁干扰（EMI）ARM7TDMI内核的LPC2200处理器，实现对天线升降的精确控制，使天线升降台按照控制要求快速、准备的定点升降，并将天线所接收到得信号经频谱分析仪处理后所得的数据，由计算机里测试软件以最快的速度处理数据，以此找到设备在该点的最大电磁骚扰值，以完成整个系统的检测工作。该设计具有抗干扰能力强，系统设计稳定性高，还有一定的实用意义和经济价值。 关键词 电磁兼容 EMC 电磁骚扰 EMI 步进电机 ARM单片机 Abstract Movements of the EMI antenna control interface circuit design is electromagnetic interference (EMI) automatic test an important link, and antenna movement and synchronization of the entire EMC testing requirements fast, accurate and stable, the design must take account of the antenna control interface circuit itself down anti-interference ability, external radiation shielding and system design stability. Designed to address these issues the ARM7TDMI core based LPC2200 processor, to achieve precise control of movements of the antenna, the antenna elevator control requirements in accordance with fast, ready to fixed-point movements, and received by the antenna to get signal processed by the spectrum analyzer data collected by the computer in test software to process data as fast as possible so as to find the equipment at the point of maximum value of electromagnetic disturbance to complete the system testing. The design has strong anti-interference, system design, high stability, there are certain practical significance and economic value. Key words Electromagnetic Compatibility Electromagnetic Radiation Harassment Stepper Motor ARM MCU 目 录 第一章 绪论 7 1.1 选题依据 7 1.2 国内外相关领域现状 7 1.3 研究的目的与意义 8 1.4论文的主要研究内容及安排 8 第二章 电磁骚扰原理及测试方法 9 2.1 电磁兼容基本概念 9 2.1.1 电磁环境(Electromagnetic Environment) 9 2.1.2 电磁兼容性(Electmmagnetic Compatibiiity-EMC) 9 2.1.3 电磁骚扰(Electmmagnetic Disturbance) 9 2.1.4 电磁干扰(Electromagnetic Interference-EMI) 9 2.2 电磁干扰的危害 10 2.2.1 信息技术设备的电磁泄漏威胁着信息安全 10 2.2.2