Part 19 - Motion Fatigue SACST 培训教材.pdf

Part 19 - Motion Fatigue Preparation 1) Under “Training Project”, create “Motion Fatigue” subdirectory 2) Copy SACINP.JACKET and SACINP.DECK model file, TRNINP.DAT motion input file from “Motion” directory to “Motion Fatigue” directory. 3) Copy FTGINP.FTG from “\Spectral Fatigue\Fatigue” directory to “Motion Fatigue” directory and rename to FTGINP.MOTIONFTG. Modifying motion input file TRNINP.DAT for creating transfer function load cases On motion options line, change Load Generation Option from WS to SL, this will enable the motion program generates real and imagery RAO loads for transfer function. Delete all wave spectral density WSPEC lines and wave spectrum load case WSLOD lines. Change barge speed BSPEED line to only include barge speed = 4 knots. The motion input file generated for motion fatigue shall looks like following MOTOPT MN 1.025 79.50 5.0 SL DT VDST STBOPT INTC ABS 6P 75.0 100.0 50.0 MOTRPT PTPTSP JCG MOTPLT TMPT CARGO 230123052101 88.0 6.5 JACK CARGO2 1.0 INCWGT ANODLPADWKWY CARGO 607L603L605L 18.0 6.5 DECK CARGO2 1.0 INCWGT AREAEQPTMISC LIB_VE UR91 3.50 0.15 2.0 FCOMP 1S SETV 75.0 FCOMP 1P SETV 75.0 FCOMP 2S BLST 72.3 FCOMP 2P BLST 72.7 FCOMP 4CS SETV 100.0 FCOMP 4CP SETV 100.0 FCOMP 5CS SETV 100.0 FCOMP 5CP SETV 100.0 FCOMP 5S SETV