铁砂船.doc

THE PROFFESTIONAL DESIGN PLAN FOR ASSEMBLE SAND IRON DREDGER WITHOUT SELF-PROPELLED QINGZHOU SANLIAN MACHINERY EQUIPMENT CO. LTD 2009-11-20 QINGZHOU SANLIAN MACHINERY EQUIPMENT CO. LTD （1） 一．A Summary 1. This ship is a non-shelf-propelled and assembled suction dredger，equipped with traverse instrument lifting device for bridge, position anchor and deck crane, magnetic separator etc. The sand pump is driven by main diesel engine via gear box. The generators provide power for electric machine and lighting of the ship. The traverse winch and lifting winch of bridge are driven by motor via gearbox. Mechanical cutter is driven by motor via cyclonical pin gear reducer. There are two anchors in stern for locating the hull. Hull goes forward through the two electric tractions. B Operation environment: Maximum temperature of atmosphere: 40℃ Minimum temperature of atmosphere: -10℃ Maximum temperature of cabin: 50℃ Maximum temperature of water: 30℃ Relatively humidity: 70% C. Hull figure of this ship is square with cross-frame structure. It designed according to level A of inland river navigation of rules and regulations for the construction and classification of sea-going steel ships of CCS (2002).hull is steel welding structure .whole hull is made of good weld ability of steel. D. Main technical parameters Item parameters Hull Length 20m Hull depth 2m Hull width 6m Tonnage full load 77.6t Draft full load 1.2m Maximum dredging depth 6m Internal diameter of suction pipe 300mm Internal diameter of discharge pipe 250mm 二．The parameters of the main engine of the mud pump Item parameters Type Weichai 6113 Power 155kw Speed 1500r/min The thickness of the mud suction pipe 10mm The thickness of the mud discharge pipe 10mm 2. Generator group Item parameters Power 100 kW Safety grade PROCON Insulation grade INS Generator motive WeichaiG6105 3. Sand pump Item parameters Manufacture Hebei pum