新建高压封闭母线生产线基地钢结构主厂房工程项目.docVIP

摘 要 该工程为云南易通电气设备有限公司在呈贡新区新建高压封闭母线生产线基地钢结构主厂房工程项目。项目为两座钢结构厂房，每座厂房建筑面积为120m×48m =5760㎡，两座共计11520㎡，每座厂房内均设置内5t轻级软钩桥式吊车2台，钢吊车梁顶面标高均为6.75m。 本文是云南易通电气车间钢结构工程的施工组织设计，通过对整个项目的管理目标、施工组织及部署、施工技术方案、施工工序分析、各种质量及安全保障措施的设计。从而达到指导施工，使施工技术与施工项目管理有机的结合。 关键词：施工、管理、方案、分析、措施 Abstract Be a projects turn to be that Ltd. of Yunnan easy to exchange an electric accessory is in Cheng Gong county newly developed area new-built high pressure close the main workshop building of bus bar production line base steel structure construction project. The project is two steel structure workshop buildings , every workshop building built-up area is 120m×48m =5760㎡, two altogether 11520㎡, 5 light t level is soft within each workshop building inner being interposed equally 2 hook gantry cranes , steel crane beam top surface altitude are 6.75m without exception. The construction organization being that Yunnan is easy to exchange the electric workshop steel structure project designs , designs by the fact that the technology scheme , construction working procedure being under construction analysing , various mass and safety ensuring measures to entire project administration target , construction organization and deployment the main body of a book. Reach the organic project administration union guiding the technology being under construction , making to be under construction and being under construction thereby.  Keywords: Construction management, scheme , analysis , measure 目 录 摘要．．．．．．．．．．．．．．．．．．．．．．．．．．．Ⅰ Abstract．．．．．．．．．．．．．．．．．．．．．．．．．．．Ⅱ 第1章 工程概况．．．．．．．．．．．．．．．．．．．．．6 1.1 概况．．．．．．．．．．．．．．．．．．．．．．．．6 1.2 本工程关键工序、关键过程的确定．．．．．．．．．．．6 1.3 工程应执行的标准、规范、规程．．．．．．．．．．．．．．．．．．．．．．．6 第2章 施工组织机构．．．．．．．．．．．．．．．．．．．．．．．7 第3章 各分部分项工程的主要施工技术方案．．．．．．．．．．．．10 3.1 制作、安装工艺流程．．．．．．．．．．．．．．．．．．．．．．．10 3.2 施工前期准备．．．．．．．．．．．．．．．．．．．．．．．12 3.2 .1 施工准备．．．．．．．．．．．．．．．．．．．．．．．13 3.2 .2 材料检验．．．．．．．．．．．．．．．．．．．．．．．13 3.3 钢构件制作．．．．．．．．．．．．．．．．．．．．．．．12 3.3.1 放样、下料．．．．．．．．．．．．．．．．．．．．．．．13 3.3.2 组装、焊接．．．．．．．．．．．．．．．．．．