array _slb负载均衡项目实战胶片.pptVIP

1、点击管理工具 – 配置管理，并选择“同步”中的“任务” 2、选中同步节点一定为“Load-Backup”，同步方向一定要选择“到”,点击”同步“开始同步，整个同步过程大约2～3分钟，对现有业务不会产生影响，备份设备无需再”保存配置“ 在两台设备中同步设置！！！ 管理员密码的修改 1、点击管理工具 – 用户管理 2、左键选中需要修改密码的用户，双击进入密码修改界面 3、修改完密码后，点击“保存”使修改生效 Enable模式密码的修改 1、点击管理工具 – 系统管理 2、选择访问控制，输入“新的Enable密码”；点击“保存”完成修改 * * * * * * * 连接多路复用 通过降低应用响应时间改善了终极用户的满意度 扩展了现有的基础架构 大量的短期连接被转换成了少量的具有高吞吐能力的连接 将服务器的连接数量减少20%到90% 将服务器的吞吐能力提高20%到100% 连接复用技术有两个主要优势特点： 1、减小后台服务器的连接数，从而实现对服务器应用处理能力的优化和提高 2、减小后台服务器遭受攻击(Syn-flood等）的可能，提高整个应用系统的安全性 * * * * The CLI has been designed to allow users various levels of access to the device by means of a tiered authorization scheme. Driven by an authentication password, determined and maintained by the System Administrator, the CLI will limit configuration control to those users with the proper authorization. There are three levels of user access: User, Enable, and Configure. Note: The CLI has a built in time-out mechanism of five minutes. If no commands are entered or modified within that time period, the system will log the user out. Previously configured commands will be retained. User Mode Operators working within the User Mode can gain very low priority access to the system. Users are only able to check current running status of the system as well as some basic “show” functions that perform as read only operations. Users will know that they are in the User Mode because the prompt following the hostname of the appliance will be “” (greater-than sign). If no hostname has been assigned to the system, the default hostname is “AN”. The User Mode prompt will appear as “AN”. Enable Mode Administrators who wish to change or customize configuration parameters for the Array must supply an Enable Mode password to gain additional rights in the CLI. The default Enable Mode password is NULL, meaning there is no password. Once the password has been entered and verified, the user will have more direct control over the operations governed by the Array appliance. Again, the user will