30 四位数字温度计.pdfVIP

30 1AD590 AD5904V 30V 55 150 11uA AD590 AD590 10KΩ 0 273.2 uA 2.732V 10 283.2 uA 2.832 V 20 293.2 uA 2.932 V 30 303.2 uA 3.032 V 40 313.2 uA 3.132 V 50 323.2 uA 3.232 V 60 333.2 uA 3.332 V 100 373.2 uA 3.732 V AD590 2 AD590 ADC0809 A/D 3 4.30.1 4 1“”P1.0 P1.7“ ”ABCDEFGH8 2“”P2.0 P2.7“ ”S1S2S3S4S5S6S7S88 3“”P3.0“”ST 4“”P3.1“”OE 5“”P3.2“”EOC 6“”P3.3“”CLK 7“”A2A1A0“ ”GND 8“”IN0AD590 9“”P0.0 P0.78“” D0D1D2D3D4D5D6D7 5 1 ADC0809 CLKP3.3 2 AD590 55 150 10KΩ 2.182V 4.232V5V VCC VCC 4.70VA/D D*2350/1282732 2732 D*2350/128 D*2350/128≥2732D*2350 /1282732 6 7 C #include AT89X52.H #include ctype.h unsigned char code dispbitcode[]={0xfe,0xfd,0xfb,0xf7, 0xef,0xdf,0xbf,0x7f}; unsigned char code dispcode[]={0x3f,0x06,0x5b,0x4f,0x66, 0x6d,0x7d,0x07,0x7f,0x6f,0x00,0x40}; unsigned char dispbuf[8]={10,10,10,10,10,10,0,0}; unsigned char dispcount; unsigned char getdata; unsigned long temp; unsigned char i; bit sflag; sbit ST=P3^0; sbit OE=P3^1; sbit EOC=P3^2; sbit CLK=P3^3; sbit LED1=P3^6; sbit LED2=P3^7; sbit SPK=P3^5; void main(void) { ST=0; OE=0; TMOD=0x12; TH0=0x216; TL0=0x216; TH1=(65536-4000)/256; TL1=(65536-4000)%256; TR1=1; TR0=1; ET0=1; ET1=1; EA=1; ST=1; ST=0; getdata=148; while(1) { ; } } void t0(void) interrupt 1 using 0 { CLK=~CLK; } void t1(void) interrupt 3 using 0 { TH1=(65536-4000)/256; TL1=(65536-4000)%256; if(EOC==1) { OE=1; getdata=P0; OE=0; temp=(getdata*2350); temp=temp/128;