[信息与通信]第二部分顶驱内外部接线plc变频张光勇.pptVIP

Flash EEPROM Memory Card Variable Frequency Drive Variable Frequency Drive AC Power Source 600 VAC 3-phase, 42-62Hz Rectifier Resultant DC Pulse Capacitors 780 VDC Inverter Controller IGB Transistors 20Hz = 600rpm 40Hz = 1,200rpm TDS-11S 600 VAC 3-Phase, 0-80Hz Variable Frequency Drive Variable Frequency Drive AC Power Source 600 VAC 3-phase, 42-62Hz Resultant DC Pulse 780 VDC Variable Frequency Drive Main Circuit Breaker 600 V 3-phase input and fuses Rectifier Capacitors Resultant DC Pulse 780 VDC Variable Frequency Drive Rectifier Capacitors Variable Frequency Drive AC Power Source 600 VAC 3-phase, 42-62Hz DC Bus Input to Inverter and DC Bus Fuses DC Bus Variable Frequency Drive AC Power Source 780 VDC Inverter Controller Variable Frequency Drive Electronics Box CUVC and CBP cards PLC Profibus Cable PMU (Parameterization Unit) PSU2 Board Variable Frequency Drive AC Power Source 780 VDC Inverter Controller Variable Frequency Drive IVI Board (Inverter-Value Interface) Fibre Optic Cables and Connectors Variable Frequency Drive AC Power Source 780 VDC Inverter Controller IGB Transistors Variable Frequency Drive Mounted Behind Capacitor Banks On Heat Sink Variable Frequency Drive Insulated Gate Bipolar Transistor Provides High Switching Speed Required by PWM’s Capable of Switching On and Off Several Thousand Times a Second Turn ON in Less Than 400 Nanoseconds Turn OFF in 500 Nanoseconds When a Positive voltage (typically +15 VDC) is applied to the Gate , the IGBT will turn ON, this is similar to closing a switch +15 VDC When the positive voltage is removed, the IGBT will turn OFF, during the OFF state a Negative voltage is applied (typically -15VDC) to prevent the device from turning ON. Current Flow -15 VDC Variable Frequency Drive Insulated Gate Bipolar Transistor Mounting Bolts Holes (6) for mounting IGBT to Heat Sink Gate Collector Emitter Variable Frequency Drive IVI Board IGBT’s On Heatsink 4 Off Each Phase (12 Total) CUVC Card IGD8 Board Fibre Optic Connec