CATIA达索官方曲面初级培训练习[管理资料].pptVIP

Wireframe and Surface Design;Table of Contents;Mobile Phone Exercise;And now practice in the context of the Mobile phone;Exercise;Design Intent : Mobile Phone;Create the guide curves and profiles.;1- Create these points : (0,0,9), (40,0,7.5), (60,0,6), (80,0,5.8) and (90,0,5.8). 2- Draw a spline passing through these points imposing a tangency condition with the X axis at the two extremities. 3- Create these points : (0,17,0), (20,20,0), (40,19,0), (60,18,0) and (90,18,0). 4- Draw a spline passing through these points imposing a tangency condition with the X axis at the last extremity. 5- Create a combine curve using the two previous spline curves. Rename it “Guide curve 1” 6- Create these points : (0,0,-3), (70,0,-4) and (90,0,-4). 7- Draw a spline passing through these points imposing a tangency condition with the X axis at the last extremity. 8- Create a combine curve using the last created spline curve and the second spline curve. Rename it “Guide curve 2”.;7- Create this sketch in the YZ plane : Rename it “Profile 1”. 8- Create this circle centered on the point (70,0,0): 9- Create the circle centered on the point (20,0,0): ;Do It Yourself (3/4);Create this sketch in the YZ plane and rename it “Profile 2”.;Exercise;Do It Yourself (1/2);Do It Yourself (2/2);Exercise;Do It Yourself (1/3);Do It Yourself (2/3);Do It Yourself (3/3);Exercise;Do It Yourself;Exercise;Do It Yourself;Recap Exercise;Exercise;Do It Yourself;Exercise;Do It Yourself;Exercise;Sketch.3 on XY plane (1-);Pad up to surface (3-) ;Exercise;1- Double click on Pt3 and change the Z value to 5mm to modify the shape of the spline 2- Open Sketch.1 to change the radius value to 25mm;Wrench Body Exercise;Exercise;Design Intent : Wrench Body;And now practice in the context of the Wrench Body;Exercise;Do It Yourself;Exercise;Do It Yourself (1/2);Do It Yourself (2/2);Exercise;Do It Yourself;Exercise;Do It Yourself;Exercise;Do It Yourself (1/2);Do It Yourself (2/2)