可修改密码1.docVIP

可修改密码、可报警的电子密码锁C语言源程序代码： #includereg52.h #define uchar unsigned char #define uint unsigned int uchar ps[]={1,2,3,4,5,0,0,0,0,0}; uchar code dispbit[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; uchar code dispcode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0x00,0x40,0x73,0xff}; uchar dispbuf[8]={18,16,16,16,16,16,16,16}; uchar dispcount; // uchar flashcount; uchar temp; uchar key; uchar keycount,readyflag,EXflag; // uchar pslen=5,BJ=0; uchar getps[10]={0,0,0,0,0,0,0,0,0,0}; bit keyoverflag; // bit errorflag; // bit rightflag; // uint second3; uint aa,bb; uint cc; bit okflag; bit alarmflag; // bit hibitflag; uchar oka,okb; uchar key_index=0; sbit pp1=P1^1;//pp1=~pp1 sbit pp7=P1^7;//pp7=~pp7 sbit pp0=P1^0;//pp0=~pp0 sbit P34=P3^4; sbit P35=P3^5; sbit P36=P3^6; sbit P37=P3^7; sbit P16=P1^6; void plus_clean(void) { while(BJ==1) { for(;keycount0;keycount--) { getps[keycount]=0; dispbuf[keycount+1]=16; } if(keycount==0) { if(readyflag==0) { EXflag=0; BJ=0; } else { BJ=0; } } } } void main(void) { uchar i,j; TMOD=0x01; // // TH0=(65536-500)/256; TL0=(65536-500)%6; TR0=1; // ET0=1; EA=1; while(1) { P3=0xff; P34=0; temp=P3; temp=temp0x0f; if(temp!=0x0f) { for(i=10;i0;i--) for(j=248;j0;j--); temp=P3; temp=temp0x0f; if(temp!=0x0f) { temp=P3; temp=temp0x0f; switch(temp) { case 0x0e: key=7; break; case 0x0d: key=8; break; case 0x0b: key=9; break; case 0x07: