关于vlan划分之no ip routing.docVIP

在SW1上配置 VTP 、trunk、vlan Routeren Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#no ip do lo Router(config)#line con 0 Router(config-line)#no exec-t Router(config-line)#logg syn Router(config-line)#exi Router(config)#host sw1 sw1(config)#no ip routing sw1(config)#^Z sw1#vlan da sw1(vlan)#vtp domain v Changing VTP domain name from NULL to v sw1(vlan)#vtp server Device mode already VTP SERVER. sw1(vlan)#exi APPLY completed. Exiting.... sw1#conf t Enter configuration commands, one per line. End with CNTL/Z. sw1(config)#int f0/0 sw1(config-if)#swi mo t