如何更改汤姆逊V7的VPIVCI值.doc

前段日子因为家里有两台电脑都需要上网，就买了各汤姆逊V7（THOMSON 585-V7）结果悲剧的是我家是铁通的网，他的VPI/VCI是8.88，而这款路由器的VPI/VCI没有8.88的选项，所以要更改机子里已经设置了的VPI/VCI,但是搜索各种网站，找各种专业人士都不知道，无奈不想换个路由器，就抱着试试的心态用GOGOLE搜索了下外国网站找到了完美的解决方案，英文原版如下： User #450224 1 posts dexter354 Im new here, please be nice Hi everyone, I have Thompson Speedtouch 536, v6, Firmware broadband router/modem which I wanted to use on vpi/vci 0/103. Since it is not there by default I had to look around on the internet so as to find some help so that I could manually plug those values in. I tried everything which everybody has mentioned above. Nothing worked for me. I finally wanted to update the firmware as mentioned by shoaibz because it worked for him. I searched everywhere but didnt get my hands on updated firware. I finally created a thread on to see if anybody could come up with the solution and there I got it. I am copying it all here so that others may get benefited from it. The reward though should go to the one who posted it. I have a BT Home Hub 1.0 flashed with Thomson ST790 firmware. Here is what I did 以上黄色部分不用管，就是在介绍他用的路由器跟我的一样需要更改VPI/VIC 下面是他总结的方法 Reset the modem （重启路由器，就是你把所有的按用户手册第一步骤+第二步骤做完，然后你的路由器的5各灯都是绿色的，如果有一个灭了或者是internet那个是橙色的都是线路连接有问题，最好好好检查下） Enter modem dashboard, select setup A new window will open welcoming you to setup, press next Select Routed PPP from menu and press next Select 0.100 from VPI/VCI drop down menu and PPPoE in connection type, press next set your broadband Username and password, press next Leave this page alone if you do not want to control the administrator settings and press next Next page will verify your new settings before applying them, press start. Now the modem will configure. When the modem finishes configuration, it will restart. A new window will open welcoming you to setup, press next Select Routed PPP from menu and press next Select 0.100 from VPI/VCI drop down menu and PPPoE in connection type, press next set your broadband Username and password, press next Leave this page alone if you