电机学的多媒体辅助教学.ppt

II Animation model of Electric Machine Structure A. 3D Animation model of the total structure of electric machines Figure 1 shows a 3D animation model for synchronous machines. The model has a mechanical and two electrical ports for exiting current and armature current respectively. The animation frame shown in Fig.4d) describes the polarity and flux of the magnetic field of single coil of AC machine armature winding as a DC current flow through it. The animation shown in Fig. 4a)-c) describe the varying procedure from the field of iron core coil with DC current to the field of single coil of the armature winding with DC current. A red is used for expressing the N pole face and blue for S pole face in Fig.4a)-d). As students usually are familiar with the polarity and the distribution of magnetic lines of iron core coil in Fig.4a), It is easily for them to understand the polarity and flux distribution of the single coil of armature winding shown in Fig.4d) by means of this animation model. 2) The animation model for pulsing field Fig.5 shows some key frames of the animation model for pulsing field of single armature coil with AC current. It is clear that so called pulsing field means variation of the position of N and S pole faces on stator internal circle and their number of flux lines. B. Animation model for rotating field of 3-phase winding ? Fig.6 shows a new type of animation called compound animation, consisting of three 2D animations of 3-phase currents (Fig.6a)) and one 3D animation of the rotating field (Fig.6b)) produced by the currents. From this model it is clear that so called rotating field means the N and S polarity region on inner surface of stator core and the distribution figure of flux density are rotating, and the field rotates for a circle when the currents vary a period. IV The Animation model of harmonic fields A. The animation of the harmonics of the no-load fields for