工业以太网常用英文术语解释.docVIP

工业以太网常用英文术语解释 导读：就爱阅读网友为您分享以下“工业以太网常用英文术语解释”资讯，希望对您有所帮助，感谢您对92的支持! Hirschmann Ethernet Lexikon 1:1 wire cable 1:1 wire cables or straight through cables are required for connecting ETHERNET components over copper cable. In general 1:1 wire cables are required for connections between terminal devices such as SPS, HMI, etc. and network components such as hubs, switches, etc. 10Base2 Standard for data transmission of 10 Mbit/s ETHERNET on thin coaxial cables (thin wire, cheapernet). Segment length max. 185 m. 10Base5 Standard for data transmission of 10 Mbit/s ETHERNET on coaxial cables (thick wire, yellow cable). Segment length max. 500 m. 10Base-FL Standard for data transmission of 10 Mbit/s ETHERNET on fiber optic cables. Each connection is created with 2 fibers, in each case, one fiber for “Transmit Data” and another one for “Receive Data”. 10Base-T Standard for data transmission of 10 Mbit/s ETHERNET on unshielded twisted pair cables (category 3, 4 or 5). Each connection is created with 2 wire pairs, in each case with one wire pair for “Transmit Data” and another one for “Receive Data”. 100Base- FX 100Base- TX 1000Base- LX 1000Base- SX 1000Base- TX Standard for data transmission of 100 Mbit/s ETHERNET on fiber optic cables. Each connection is created with 2 fibers, in each case, one fiber for “Transmit Data” and another one for “Receive Data”. Standard for data transmission of 100 Mbit/s ETHERNET on twisted pair cables (category 5). Each connection is created with 2 wire pairs, in each case with one wire pair for “Transmit Data” and another one for “Receive Data”. Standard for data transmission of 1000 Mbit/s ETHERNET on fiber optic cables for a wavelength of 1300 nm. Each nnection is created with 2 fibers, in each case, one fiber for “Transmit Data” and another one for “Receive Data”. Standard for data transmission of 1000 Mbit/s ETHERNET on fiber optic cables for a wavelength of 850 nm. Each onnection is created with 2 fibers, in each case, one fib