NETWORKED ATTACHED DEVICES AT SNS在SNS网络连接的设备.pptVIP

National Instruments Confidential National Instruments Confidential * Connecting LabVIEW to EPICS network Xiang Yan Reven.Yan@ National Instruments EPICS: Experimental Physics and Industrial Control System Graphical dataflow programming Interactive front panel / GUI Efficient compiled execution Targets Windows, Real-Time, FPGA, Linux, Macintosh, DSP, Other Processors I/O and analysis libraries Distributed networking capabilities Current LabVIEW-EPICS interfaces Shared memory interface By SNS ORNL DIM (Distributed Information Management System) By GSI CERN LabVIEW EPICS Client I/O server EPICS Database Hardware Sequencer (Finite State Machine) IOC Software with Shared Memory Interface Database Engine Write I/O values to database. Default update rate is 10 Hz. Can be as fast as 25 Hz. Reads values from the database to drive state changes in the IOC control application. Channel Access Protocol Server Publishes values from the database onto the network using Channel Access protocol. Network Traffic (Channel Access Protocol) EPICS Node – Windows Shared Memory LabVIEW Application IOC Software with DIM Interface The basic idea is to make LabVIEW application as a DIM service. More like a DIM gateway. Project Library I/O server Shared variable VI LabVIEW Programming Environment LabVIEW EPICS Client I/O Server Bases on EPICS base 3.14.8 Runs on LabVIEW for Windows Requires LabVIEW Datalogging Supervisory Control (DSC) Module Integrates with LabVIEW features Logging Alarming Scaling ... EPICS and LabVIEW Channel Access Protocol IOC EPICS Database I/O HW IOC EPICS Database I/O HW OPI IOC EPICS Database I/O HW IOC EPICS Database I/O HW OPI EPICS Client I/O Server LabVIEW Application EPICS Database Hardware Sequencer (Finite State Machine) EPICS and LabVIEW Database Engine Write I/O values to database. Default update rate is 10 Hz. Can be as fast as 25 Hz. Reads values from the database to drive state changes in the IOC control application. Channel Access