1602LCD时钟C程序.docVIP

#includereg52.h #include intrins.h sbit rs=P2^0; sbit rw=P2^1; sbit e=P2^2;//使能信号输入端 sbit sset=P1^0;//设置按钮 sbit sadd=P1^1;//加按钮 sbit sdel=P1^2;//减按钮 unsigned char second,minute,hour,count,keycount=0; unsigned char code table0[]=The Time Is:;//第一行显示 unsigned char code table1[]= : : ; //第二行显示 unsigned char code table2[]=0123456789; void delay(unsigned int x)//延时 { unsigned int a,b; for(a=x;a!=0;a--) { for(b=20;b!=0;b--) { ; } } } void del10ms()//延时10ms { unsigned int a,b; for(a=20;a!=0;a--) { for(b=248;b!=0;b--) { ; } } } void writecomm(unsigned char comm)//写入指令寄存器 { rs=0; P0=comm; e=0; delay(5);//写，下降沿有效 e=1; delay(5); e=0; } void writedat(unsigned char dat)//写入数据寄存器 { rs=1; P0=dat; e=0; delay(5);//写，下降沿有效 e=1; delay(5); e=0; } void writesmh(unsigned char add,unsigned char date)//显示个位和十位数据 { unsigned char shi,ge; shi=date/10; ge=date%10; writecomm(0xc0+add); delay(5); writedat(table2[shi]); delay(5); writedat(table2[ge]); delay(5); } void keyscan()// { if(sset==0) { del10ms(); if(sset==0) { keycount++; while(sset==0) { ; } if(keycount==1) { TR0=0; writecomm(0xcb); writecomm(0x0f); } if(keycount==2) { writecomm(0xc8); writecomm(0x0f); } if(keycount==3) { writecomm(0xc5); writecomm(0x0f); } if(keycount==4) { keycount=0; writecomm(0x0c); TR0=1; } } } if(keycount!=0) { if(keycount==1)//编辑秒 { if(sadd==0)//数值加1 { del10ms(); if(sadd==0) { second++; if(second==60) { second=0; } while(sadd==0) { ; } } writesmh(10,second); } if(sdel==0)//数值减1 { del10ms(); if(sdel==0) { if(second==0) { second=60; } second--; while(sdel==0) { ; } } writesmh(10,second); } writecomm(0x0f); writecomm(0xcb); } if(keycount==2)//编辑分钟 { if(sadd==0)//数值