单臂路由之间实现ipv6通信.docVIP

两个单臂路由之间的通信 方法一： 用静态路由配置 R-1的路由配置。。。。。。。。静态路由 r-1 #show run Building configuration... Current configuration : 1057 bytes ! version 12.4 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption ! hostname r-1 ! ipv6 unicast-routing ! username r-2 password 0 123456 interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 rip sang enable ! interface FastEthernet0/0.1 encapsulation dot1Q 2 no ip address ipv6 address 2010:BBBB::1/64 ! interface FastEthernet0/0.2 encapsulation dot1Q 3 no ip address ipv6