二次回路毕业设计.docVIP

摘 要 电是能量的一种表现形式，电力已成为工农业生产不可缺少的动力，并广泛应用到一切生产部门和生活方面。电能有许多优点：首先，它可简便的转化成另一种形式的能量。例如，工厂中的电动机，就是将电能转化成机械能，拖动各种机械。 锅炉系统在发电厂中是产生蒸汽的设备系统。从而带动电机转动，电厂锅炉是火力发电厂三大主要设备中重要的能力转换设备。它的作用是将燃料的化学能转变成为热能，并利用热能加热炉水使之成为具有足够数量和一定质量（汽温、汽压）的过热蒸汽，供汽轮机使用。 本论文是针对2×300MW火力发电厂锅炉电动机回路的设计。发电厂的容量越大在系统中的地位越重要其影响也越大。本次设计主要针对电动机控制回路和信号回路设计二部分内容。在发电厂电气主接线的设计中应综合考虑电厂的性质、规模和在系统中的地位等因素。在厂用锅炉系统电动机控制信号回路设计。所以6kv厂用电动机的保护、控制、测量和信号回路的设计是以二次系统进行展开进行的。二次回路技术的发展是从简单的就地分散控制到由计算机为核心构成的综合控制。 关键字：锅炉系统，电动机，二次回路。 Summary Electricity is a form of energy, electricity has become an indispensable power industrial and agricultural production, and is widely applied to all production and life. Electricity has many advantages: first of all, it can be easy conversion into another form of energy. For example, the motor factory, is that convert electrical energy into mechanical energy, drag a variety of machinery; Motors are pioneers of economic development. With the continuous development of social economy, more and more is also high to the requirement of power system. Modern power system, both stand-alone capacity, or system capacity is more and more big, the power grid structure are complicated. In order to guarantee safe and stable operation of power system, improve the quality of motor work in power plant, so as to provide strong guarantee for the economic construction, to improve the reliability of power system operation. This thesis is aimed at 2 x 300 mw thermal power plant boiler motor circuit design. Power plant, the greater the capacity of  more important  its influence in the position in system. This design mainly aimed at the motor control circuit and signal circuit design two parts. In power plant, the main electrical wiring  should be considered in the design of the power plant of the nature, scale, and in the system status and other factors. In the factory using boiler system motor control signal circuit design. So 6 kv factory motor protection, control, measurement