大尺寸轴承游隙测量.pptVIP

Mounted and Dismounting SKF 大尺寸轴承游隙测量 SKF 高级应用技术工程师主管 戴建国 * 用塞尺测量大尺寸的球面滚子轴承　　　　　　内孔直径 500 mm 用塞尺测量轴承游隙 测量步骤1 测量步骤2 测量步骤3 测量步骤4 测量步骤4 239/560 CAK/C083 轴承游隙的测量 239/560 CAK/C083 轴承游隙的测量 239/560 CAK/C083 轴承游隙的测量 测量游隙时的注意事项 测量设备 测量步骤 测量步骤 测量步骤 测量步骤 测量步骤 计算轴向游隙 备注 实际例子 测量步骤 测量步骤 测量步骤 测量步骤 In addition to locking down the nut, spanners are also used to mount small-medium size bearing on adapter sleeves. Impact spanners are used to mount bearings with larger nuts, KM 23 / AN24 and above. Standard Steel Drifts are generally ineffective when attempting to mount larger size tapered bore bearings. Always apply force to the ring with the press fit Q: What happens if we dont? A: Damage to rings and rollers: True Brinelling Damage can also occur when secondary, external components are mounted: Sheaves or couplings on shaft, for example 锁紧螺母时，要将轴承吊起来，否则，扳手用力时滚动体会冲击滚道。 联轴器安装时，要加热安装，不可敲击。 否则，冲击滚道。 Introduction The accompanying notes to the slides form a guideline to producing successful presentations. You may use this file as a ‘design template’ or simply as slide master copies which you can cut and paste. When you assign a ‘design template’ to your presentation it will adopt the properties from the ‘master slides’ only. Therefore additional styled slides, such as divider slides, will have to be copied and pasted from the original slide in this document. ‘Notes master’ and ‘handout master’ are set with fixed elements; footer information and the SKF brandmark. It is recommended that you print your presentation in ‘black and white’ to a black and white printer. ‘Black and white’ will convert all colour elements to grayscale. If you wish to preview how your presentation will print in ‘black and white’, the option to do this is available under the ‘View’ menu in PowerPoint. General principles All elements such as text and graphics should be positioned within the margins of the slide. These can be seen by viewing the drawing guides in the typographic grid (Ctrl G). Text should not be