斯伦贝谢公司针对生产优化技术介绍.ppt

* Compare with conventional ARC tool: xxxx, PS has 1 more T for anisotropy and 2 more tiled R for directional measurement. Can provide 2M,400K and 100k Hz measurement . These make it possible for directional measurement and deeper DOI. Based on a simulation analysis for heavy oil recovery, it was believed that if the well trajectory could be kept in the lower third of the reservoir and then be slowly moved up in the later part of the horizontal section, the ultimate heavy oil reservoir recovery would be significantly improved. To retrieve the remaining attic oil from existing fields, keep the well trajectory as high as possible in the target formation in order to minimize water production, hence maximize the ultimate light oil recovery. * The solution – the PowerV Vertical Rotary Steerable System – Automatic, Simple, Non-Intrusive, Efficient and Cost-Effective. * * * * Magnetic Dipole Transmitter (moment 10000 time higher than usual induction tools) primary filed induces current in the formation. This induced current induces a secondary field. Secondary field is 10 to 50% of the total field measured by the receivers. The secondary field is proportional to the formation conductivity, I.e it contains the information we need. Monitoring of EOR methods (water flood movement and efficiency) Understanding fluid issues (Water, steam breakthroughs) Well planning (infill and sidetrack programs) Identification of bypassed pay and oil bearing bodies Integration into reservoir management workflow * 1. ShengLi oilfield… * Sonic logging goal normally used to recover refracted sonic waves, Application of this are: Formation evaluation such us porosity or permebility determination In geophysical, from as simple as time-depth relation, synthetic seismogram to to be used in AVO modeling Geomechanic for mechanical property calculation, radial profiling etc But if you record long enough, we can recover the reflected waves and process (this includes separation, imaging with migratio