1 如何在ubuntu下使用 codeblocks46.doc

如何在ubuntu下使用 codeblocksInstalling Code::Blocks nightly build on Ubuntu From CodeBlocks Jump to:?navigation?,?search This is a quick guide to get Code::Blocks up and running on your Ubuntu based Linux distribution. It is also going to make sure you can develop wxWidgets applications on your box as well. Look at the bottom of this guide for a complete command line that will install all the packages in one operation. First be sure you have the necessary software to compile and debug programs. 1. Install the compiler. sudo apt-get install build-essential 2. Install the debugger. sudo apt-get install gdb Youll need to install wxWidgets to use Codeblocks. Revisions prior to revision 4051 use wxWidgets 2.6 and revisions from 4051 and after use wxWidgets 2.8.4. If you want to install a revision prior to revision 4051, make sure you have your universe and multiverse?repositories enabled?and install the following packages. 3. Install wxWidgets library. (This package is all that is needed to run any application that uses wxWidgets. ie. Code::Blocks) sudo apt-get install libwxgtk2.6-0 4. Install the wxWidgets developement packages. (This is used to develop wxWidgets applications of your own.) sudo apt-get install libwxgtk2.6-dev wx2.6-headers wx-common  5.?(OPTIONAL)?Install the wxWidgets documentation. sudo apt-get install wx2.6-doc To install wxWidgets 2.8.4?you need to be using Ubuntu 6.10 (Edgy Eft) or Ubuntu 7.04 (Feisty Fawn) and you need to add the wxWidget repository to your sources.list.?You can install wxWidgets 2.8.4 on Ubuntu 6.06 (Dapper Drake), but the nightly builds are not made to run on Dapper. 1. Backup your current sources.list first for precaution. sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak 2. Open your sources.list in a text editor to edit it. gksudo gedit /etc/apt/sources.list 3. Add the correct repository for