现场总线技术在柔性制造中的应用研究推荐.doc

河北科技大学硕士学位论文 PAGE IV 现场总线技术在柔性制造中的应用研究 现场总线技术是现代企业综合自动化领域研究、应用、发展的一项新技术，它可以将控制系统与通信网络集成，信息交换的范围从现场设备、制作车间逐步覆盖到整个工厂甚至企业集团。它的出现使自动化领域产生了一场深刻变革，对其他相关领域也产生着深远影响。 本文对目前国内外PROFIBUS现场总线的技术研究现状进行了分析，并在研究传统柔性制造系统在通信网络存在的缺点基础上，提出了将嵌入式总线桥技术应用于机加工的柔性制造系统的新方案。通过PROFIBUS-DP现场总线技术研究，开发了基于PROFIBUS-DP总线协议的智能从站，并对智能从站进行软件及硬件系统开发，使其具有基本的数字输入、输出、数显等功能，实现了从站与PROFIBUS-DP主站进行数据通信的基本功能，为该技术在柔性制造领域的应用提供了重要依据。 通过本文的研究得出，将PROFIBUS-DP现场总线技术应用于机加工的柔性制造系统，可充分发挥PROFIBUS-DP的各种优点，并能克服传统柔性制造系统中采用485总线技术的缺陷，对柔性制造技术中通信的改善和提高起到了积极的作用。PROFIBUS-DP智能从站的软硬件系统开发对我国PROFIBUS技术深入研究及实际应用起到积极的促进作用。 关键词 柔性制造系统；现场总线；PROFIBUS-DP；嵌入式总线桥；智能从站 Study on Application of Fieldbus in Flexible Manufacturing System The fieldbus is a new technology of research, applications, development of a modern enterprise integrated automation, and it can integrated the control system and communication network and the exchange of information ranging from devices, production workshop and gradually cover the entire plant or enterprise group. It appears that the automation field produces a profound change in other related field, and has a profound influence. In this paper, the author analyzes the status of studying on the technology of the present domestic PROFIBUS in fieldbus, on the basis of shortcoming for studying the traditional flexible manufacturing system, and proposes a new plan which applies bus bridge embeded into flexible manufacturing system. Through researching PROFIBUS-DP fieldbus technology, the author develops the intelligence PROFIBUS-DP slave station, and design the software and hardware by it, make it have the functions of digital input, output and digital display basically, realize the telecom with PROFIBUS-DP main station in data. For this technology in the field of flexible manufacturing application it provides an important basis. According to the paper, applying the PROFIBUS-DP fieldbus to flexible manufacturing system, it exerts all kinds of advantages of PROFIBUS-DP, and outcomes the defects of traditional flexibl