注塑工业插座零件塑料注塑磨具设计论文.docVIP

注塑-工业插座零件塑料注塑磨具设计-论文 关键词:插座零件;注塑模具;侧抽芯机构;侧浇口 Industrial socket parts plastic injection molding tool design Abstract This paper introduces the design, sockets for plastic injection mold include: analysis of the plastic injection molding machine; selection; mould design; design of molding parts; core-pulling mechanism design. This paper is about the design of injection mold, the mold is simple in structure, forming type are very simple. Based on the technological properties of the number of products and plastic injection mold design to the parting surface of the methods were determined, using a mold cavity, using a runner for pouring out form of introduction mechanism for putting the completion of the introduction of plastic parts,. Plastic properties of materials and process characteristics of ABS in the correct analysis of the. A detailed introduction to the punch, die, casting system, stripping mechanism, the side core pulling system, selection of standard parts, non-standard pieces of the design process design Through this design, can have a preliminary understanding of the injection mold and drawing software, pay attention to the details of the design, understanding the structure and working principle of mold; through the CAD learning, you can create a simple parts library, to improve work efficiency. Keywords: socket parts;injection mold; side core-pulling mechanism; the side gate 目 录 1 绪论 11.1前言 11.2 模具发展现状及发展方向 1 2 塑料材料分析 52.1 塑件材料的选择 52.2 塑件收缩率与模具尺寸的关系 7 3 塑件的工艺分析 93.1 塑件的结构设计 93.2 塑件尺寸及精度 103.3 塑件表面粗糙度 113.4 塑件的体积和质量 11 4 注射成型工艺方案及模具结构的分析和确定 124.1 注射成型工艺过程分析 124.2 浇口种类的确定 134.3 型腔数目的确定 134.4 注射机的选择和校核 134.4.1 注射量的校核 144.4.2 型腔数量的确定和校核 154.4.3 塑件在分型面上的投影面积与锁模力的校核 154.4.4 模具与注射机安装模具部分相关尺寸校核 16 5 注射模具结构设计 185.1 分型面的设计 185.2 型腔的布局 185.3 浇注系统的设计 195.3.1 浇注系统组成 195.3.2 确定浇注系统的原则 195.3.3 主流道的设计 205.3.4 分流道的设计 215.3.5 浇口的设计 215.3.6 冷料穴的设计 21 5.4 注射模成型零部件的设计 225.4.1 成型零部件结构设计 225.4.2 成型零部件工作尺寸的计算 235.5 排气结构设计 245.6 脱模机构的设计 245.6.1 脱模机构的选用原则