基于ug的磁极冲片复式冲模参数化设计系统开发-机械工程专业论文.docxVIP

AbstractPunching sheet with magnetic pole is an important part of hydro-generator, which consist of compound die and punching. With the development of factories, the demand on its quality is becoming more and more high.In order to achieve lower cost of manufacturing, shorter manufacturing cycle time and less workload of die design, finding a kind of design method which can implement parametric design on compound die of punching sheet with magnetic pole is urgent.This thesis did some research work as follows:The design on structure, function and process of system is done. Given that there are many kinds of parts, but their structures are similar, modular design method is proposed. Considering the actual problems of compound die, the integrated program of UG software is developed.The key algorithm of parametric design is researched. Space coordinate is transformed and then is used in assemble of compound die. This thesis proposed three algorithm for side location and searching, and found the optimal algorithm, then it is used in location of target, at last the precise location of feature modeling is realized. Geometric constraint method is researched, and the original geometric target is redefined, which enlarge the range and improve the efficiency. The algorithm of graphics arrangement is researched, the problem that view interference and overlap might happen during automatic drawing.At last, the parametric design system of punching sheet with magnetic pole is developed with the platform of UG NX6.0 and VS2010. With modular idea, three dimensional modeling and assemble method of compound die parts are proposed, which realized automatic modeling and assemble on magnetic poles with different structures and parameters. According to the structure size, standard engineering drawing can be obtained, which means 3d and 2d engineering drawing of magnetic pole with compound die can be drew automatically.Keywords: Punching sheet with magnetic pole, Secondary deve