广东某厂区地下管网安装作业指导书_secret.docVIP

目 录 1、工程概况····························································3 1.1工程概况···························································3 1.2工程范围及工程量···················································3 1.3施工工期···························································3 2、编制依据···························································3 3、作业前的条件和准备··················································4 3.1技术准备···························································4 3.2作业人员···························································5 3.3作业工机具·························································7 3.4材料和设备·························································8 3.5工序交接··························································13 4、作业程序和方法····················································13 4.1厂区室外消防、工业、生活给水管道安装施工工序······················13 4.2厂区室外生活污水管道安装施工工序··································19 4.3管沟施工··························································20 4.4质量控制计划······················································21 4.5施工过程控制规范··················································24 5、质量控制点的设置和质量通病预防····································24 5.1质量目标··························································24 5.2 质量控制及质量通病预防的设置为2×MW级燃煤机组，我公司承建，本作业指导书。2×300MW级燃煤机组 施工组织应设立技术组、质安组、管道班、电气焊班、开挖班、测量班等。 施工人员数量根据工程规模和工程量的大小确定，一般应配备的人员有：给排水专业技术人员，测量工、管道工、电焊工、气焊工、起重工、油漆工等。 3.2.1 作业人员配置、资格 序号 作业人员工种 数量 资格要求 资质 1 技术员 1 能够审清本项目施工图纸，领会设计思想，掌握施工工艺，熟悉施工质量和安环要求。 助工以上 2 班组长 2 熟悉本项目施工的工艺流程，能有效组织好施工人员按照作业指导书的要求施工，熟悉施工质量和安环要求。 中级工 3 安装工 12 熟练掌握本项目的技术、工艺要求，知道施工质量、安环要求。 中、初级工 4 测量工 2 熟练掌握测量的基本知识和技能、施工工艺精度要求。 中级工 5 焊工 4 熟悉焊接工艺及相关要求，具有与焊接项目相符合的焊工合格证书。 持证 6 起重工 4 熟悉所操作吊车的机械性能，技术熟练。 持证 7 油漆工 4 熟练掌握本项目的技术、工艺要求，知道施工质量、安环要求。 中、初级工 3.2.2 作业人员职责分工和权限 序号 岗位名称 职责分工和权限 1 技术员 全面负责输煤系统室外消防、工业水、生活水及生活污水管道安装的技术工作，参加相关图纸会审，处理设计变更，编制施工作业指导书、施工预算、技术、安全措施，并主持技术交底工作。 深入现场指导施工，及时发现和解决施工中的技术、质量隐患，按照指导书的要求指导施工。 配合班组长进行施工验收的自检工作。 记录、整理施工记录和验收记录。 对违章操作，有权制止，严重者可令其停工，并及时向有关领导汇报。 2 班组长 负责组织安排施工人力，物力。严格