合金铸铁车削机理及其在hx型气缸套加工中的应用分析word格式论文.docxVIP

优秀毕业论文 精品参考文献资料 上海交通大学工程硕士学位论文 ABSTRACT force, chip breaking performance and chip form, tool wear, surface quality. Cutting force analysis: using multiple regression method to establish a mathematical model between the cutting force and cutting parameters for the safe of machining parameter optimization. Surface Quality Evaluation: Take the surface roughness as primary object to study , study the impact of surface roughness from the side of cutting parameters, get a mathematical model of surface roughness and cutting parameters through using linear regression method, then through the processing roughness histogram obtained the most critical affecting factor. Cutting parameters optimization: using response surface methodology first calculate the distribution space of processing parameters, through regression the non-dimensional linear codes of the various processing parameters obtained the model of surface roughness. Analysing the regression model of the surface roughness, combined factors effects and processing efficiency, using single-factor method to optimize the cutting parameters, then finally selected optimized cutting parameters. Comparison tool life and cutting wear analysis: through using different tools for cutting wear test at different cutting parameters, study wear and breakage patterns of tool and its main failure forms when the alloy cast iron materials under processing, and wear mechanism of the cutting tool life was analyzed. Applied model prediction method to predict life to promote the rational application of the tool. According to test results, combined with production practice I designed processing of HX-type cylinder liner for mass production as well as improve and optimize the processing of similar products in the company. KEY WORDS: alloy cast iron, HX-type cylinder liner, cutting parameters, process design IV  上海交通大学 学位论文原创性声明 本人郑重声明:所呈交的学位论文，是本人在导师的指导 下，独立进行研究工作所取得的成果。除文中已经注明引用的内 容外，本论文不包含任何其他个人或集体已经发表或撰写过的作 品成果。对本文的研究做出重要贡献的个人和集体，均已在文中