基于实测数据的深基坑支护结构安全状态量化动态研究方法探讨-discussion on quantitative dynamic research method of deep foundation pit supporting structure safety state based on measured data.docxVIP

II 建立了分级明确的基坑本体安全评价指标体系。从评估方法、评估流程等方面对 基于实测数据的基坑安全评估做了详细探讨，并进行了实例应用验证。将实测数 据纳入到风险评估过程中，使评估结果更加可信，亦可由该法将繁杂的基坑监测 数据系统整理分析以得出对基坑安全的宏观评估。 关键词：基坑工程；实测数据；警戒值；灌注桩围护墙；支撑体系；量化评估  PAGE 4 The Study of Safety State Quantification Analysis Method Based on the Measured Data of Deep Foundation Pit Supporting Structure Abstract With the development of city construction, the increase of population density, high-rise buildings continue to rise, the use of underground space is more and more popular in recent years, which have made a large number of deep foundation pit emergence. However, deep foundation pit is very uncertain and difficult, accidents still occur from time to time. Facts have proved that, monitoring data have obvious signs before the accident, so this paper study the pit safety quantitative evaluation based on measured data, in order to achieve dynamic security control of foundation pit construction. In this paper, the pit safety evaluation index, the deformation and stress rule of retaining wall and common support system, and the risk assessment method based on measured data is studied. The main work and conclusions are as follows: This paper summed up the current several reasons for major foundation pit accidents by statistics large number of accident cases, and studied monitoring data response when accidents occur, at last selected suitable monitoring project as safety evaluation index by comparing predictability, sensitivity, and feasibility. The simplified calculation formula of bored pile ultimate moment was derived, and the relationship between ultimate bending moment and reinforcement ratio of common bored pile were calculated. It introduced the principle of calculating ultimate moment based on displacement data, and pointed out that the key was the calculation of curvature from displacement curve fitting and bending stiffness of retaining wall. It also studied practicability of several methods for moment combining with the engineering examples, and evaluate