Chapter 6. Bending Deformation 材料力学 英文版教材课程.pptVIP

REVIEW;Containing Sections: 6.1 Introduction 6.2 Equation of Elastic Curve 6.3 Direct Integration Method 6.4 Method of Superposition;Tensional deformation;Deduce further, we can get the approximate differential equation of elastic curve (挠曲线近似微分方程):; If it is a straight prismatic beam(等直梁): ;Chapter 6. Bending Deformation ;Chapter 6. Bending Deformation ;a;F1;a;Chapter 6. Bending Deformation ;A;1. Rigidize the BC segment;1. Consider a micro-segment dx at x position;A;a;a;Chapter 6. Bending Deformation ;Chapter 6. Bending Deformation ;F; Homework: Reading;12-30. The pipe assembly consists of three equal-sized pipes with flexibility stiffness EI and torsional stiffness GIp (GJ). Determine the vertical deflection at point A.;REVIEW;机床主轴;a;● 合理安排载荷，改变载荷的作用方式、位置和分 布情况，减小弯矩；;A;A;1．明确挠曲线、挠度、转角等概念，了解梁挠曲线近似微分方程的建立过程；;flexural rigidity 抗弯刚度 elastic curve 挠曲线 constant of integration 积分常数 boundary condition 边界条件 continuity condition 连续条件 slope 转角 deflection 挠度 the integration method 积分法 method of superposition 叠加法 moment-area method 力矩面积法; Homework: Reading;12-50. Determine the deflection(挠度) at the end B of the clamped A-36 steel strip(钢条). The spring(弹簧) has a stiffness of k=2N/mm. The strip is 5 mm wide and 10 mm high. Also, draw the shear and moment diagrams for the strip. (E=200e9Pa);电阻应变片测量法 原理简介;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章 弯曲变形;第六章的基本要求