gambit离心水泵叶轮网格划分.pdfVIP

LOW-SPEED CENTRIFUGAL COMPRESSOR 9. LOW-SPEED CENTRIFUGAL COMPRESSOR This tutorial employs the configuration of a low-speed, centrifugal compressor blade to demonstrate the use of imported geometry and the turbo volume decomposition operation. It illustrates how to adjust decomposition split points and employs a structured hexahedral mesh. In this tutorial, you will learn how to: • Create a turbo volume based on imported ACIS geometry • Decompose a turbo volume 9.1 Prerequisites To understand this tutorial, you should review and understand the steps, principles, and procedures outlined in Tutorials 1, 2, 3, 4, and 8. © Fluent Inc., Mar-06 9-1 Problem Description LOW-SPEED CENTRIFUGAL COMPRESSOR 9.2 Problem Description Figure 9-1 shows the turbomachinery configuration to be modeled and meshed in this tutorial. The configuration represents the rotor of a low-speed centrifugal compressor containing 20 identical, highly skewed blades, each of which is spaced equidistant from the others on the rotor hub. The configuration is designed such that the angles of the inlet and outlet flow directions are offset from each other by 90º. Outlet flow Inlet flow Figure 9-1: Low-speed centrifugal compressor rotor 9-2 © Fluent Inc., Mar-06 LOW-SPEED CENTRIFUGAL COMPRESSOR Strategy 9.3 Strategy The GAMBIT turbo modeling procedure includes seven basic steps: 1) Creating or importing edge data that describes the turbo profile 2) Creating th